Home Forums Weaver Xtreme Theme blog post slider not working

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #70526
    merlojh
    Participant

    Not sure why but this slider is not working? John

    https://www.marinorchidsociety.com/poe-exhibit-2022/

    #70527
    scrambler
    Moderator

    No ideas why, but I see a message about unsafe content

    Mixed Content: The page at ‘https://www.marinorchidsociety.com/poe-exhibit-2022/’ was loaded over HTTPS, but requested an insecure element ‘http://www.marinorchidsociety.com/wp-content/uploads/2018/05/orchid-footer.jpg’. This request was automatically upgraded to HTTPS, For more information see https://blog.chromium.org/2019/10/no-more-mixed-messages-about-https.html

    SO you may want to starts by cleaning up all URLS without https.

    #70548
    merlojh
    Participant

    The orchid footer jpeg should I remove it? Not sure what to do. John

    #70549
    scrambler
    Moderator

    Your site is https, so You just need to change all http urls on your site to https.

    Normally when you converted your site to https, you should have run a utility to search and replace all the http into https.

    If you did not do the conversion, whoever did it or your host provider may be able to help with that.

    In the mean time, to make sure this is the actually issue, you can temporarily remove the offending image and see if the Slider works without it.

    #70550
    merlojh
    Participant

    Thanks for the info John

    #70551
    merlojh
    Participant

    I checked every page on site and all had https?

    #70552
    scrambler
    Moderator

    Read the message, it is not a page, it is the picture in your media library

    #70553
    merlojh
    Participant

    I removed the image and plugin used for it but slider still not working funny because all the other ones are working fine? Johm

    POE Exhibit 2022

    #70554
    scrambler
    Moderator

    Try deleting the slider and recreating  one

Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.